- Model NO.: R-9410/9810
- RS-485 Base: Sub Controller
- Specification: CE ISO9001
- Type: Sub Controller
- Trademark: RemoDAQ
- Origin: China
- Easy to install and networking RS-485 communication
- Each system has 4 or 8 slot, Max can support 128 I/O point
- Support various software including Windows DLL driver, OCX driver, OPC server and HMI/SCAPA software driver.
- With surge protection, avoid system to be damaged by dangerous voltage and power transients
- Can use one R-8510 repeater to expand network, each system can have Max 256 R-9000 unit, max transmit distance can reach 10km
R-9410 and R-9810 system use EIA RS-485 communication protocol. This protocol is the standard which has been widely used in industrial field balancing, two-way transmit. RS-485 has the advantage of further transmitting distance, higher transmitting speed, very suitable for industrial application.
CPU 16 Micro processor
I/O model capacity: 4or 8
Power consumption: 1.0W(R-9410) 4.0W(R-9810)
- Isolation protection
Isolation protection: communication power 3000VDC
I/O model isolation:3000VDC
Status display: Power, CPU< communication
Self-test: self-test when power on
Software diagnosis: enabled
Network: RS-232or RS 485(2-wire) to mainframe
Rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K and 15.2Kbps
Max communicate distance: 4000 feet(1.2km)
Command format: ASCII command/response protocol
Reliability check: with checksum communication error check
Asynchronous communication data format: 1 start bit, 8 data bit, 1 stop bit, with no check
Max vertices: each PC serial port can connect 256 sections system
- Power requirement
Reverse power protection
Power protection: suppress current input transient
- Mechanical features:
Shell: KJW plastics, with install accessories
Plug-in screw terminator: diameter of lead 0.05mm2 to 2.5mm2, 1-#12 or 2-#14 to #22AWG
Operating temp -10ºC~+70ºC
Storage temp -10ºC~+85ºC
Humidity: 5~95% non-condensing
RemoDAQ-9410 RS485 (4 slots) distributed data acquisition control system.
RemoDAQ-9810 RS485 (8 slots) distributed data acquisition control system.
DSLC-OPC/RemoDAQ, used for RemoDAQ-8000/ RemoDAQ-9000 serials (RS-485) OPC server.