Main Features:
R-9420 is an I/O system based on Ethernet. It communicate distance can reach 100M without repeater. Users can configure through Ethernet and allow 4 PC visit data at the same time.

Specifications:  

Features:
-  ARM 32-bit RISC CPU
-  10/100 base-T automatically check high speed communication terminal
-  Support Modbus/TCP communication protocol, easy to integrate
-  Support UDP event dealing function
-  Can transmit 100M without any repeater
-  Can remote configure through Ethernet
-  Allow 8 PC visit at the same time
-  8 I/O slot can support128 point data monitor
-  1500VDC Ethernet communication isolation
-  Build-in system auto-reposition watchdog
-  Windows tool: I/O model configure and calibrate, network automatically
  search  data stream setup, present status monitoring and warning trigger.
-  Provide ActiveX driver for user developing

Specification:
-  Processor:
   CPU: 32-bit RISC CPU
   I/O model capacity: 4 slot
   Memory: 4MB RAM 512KB Flash ROM
   Operating system: real-time OS
   Status display: power (3.3V, 5V), CPU, communication (link, active, 10/100Mbps, TX, RX)
   CPU power consumption: 5.0W
   Reset switch : yes
-  Isolation protection
   Ethernet Communication; 1500VDC
   Communication power 3000VDC
   I/O model isolation:3000VDC
-  Diagnosis:
   Power up Self test : hardware and software
-  Ethernet
   Interface:  10/100Base T
   Lead:  UTP, 5 or higher wire
   Bus connection: RJ45 model slot
   Communication protocol: Modbus/TCP,TCP,UDP,IP,ARP
   Data transmitting speed: Max 100Mbps
   Max communicate distance: 100m without repeater
   Response time: less than 5ms
-  Mechanical features:
   Coating: ABS plastics, with install accessories
   Plug-in screw terminator: diameter of lead 0.05mm2  to 2.5mm2, 1-#12 or 2-#14 to #22AWG
-  Serial network:
   Interface:  RS-485
   Communication protocol:  ModBus/RTU
   Max vertices: 32
   Baud rate:  115.2Kbps
-  Power requirement
   Unconditioned: +10-30VDC
   Over voltage protection and Reverse power protection
-  Software support
   ActiveX Driver
   Windows tool: network setting, I/O configuration and standard, data stream, warning setting Modbus/TCP OPC Server
-  Environment:
   Operating temp -10oC~+70oC
   Storage temp -25oC~+85oC
-  Humidity: 5~95% non-condensing